CMD VENTURE CO., LTD.

TEL: 02-9511288 , 029510388 FAX: 025806064

E-mail : cmdventure@hotmail.com

Website: www.cmdventure.com

Artist's interpretation of article headline

CMD VENTURE CO., LTD.

บริษัท ซีเอ็มดี เวนเชอร์ จำกัด จำหน่าย ตะแกรงกั้นจ๊อย ตะแกรงเหล็กฉีกเซี้ยมสังกะสี ตะข่ายฉาบปูนกันแตกร้าว

Artist's interpretation of article headline

CMD VENTURE CO., LTD.

TEL: 02-9511288 , 029510388 FAX: 025806064

E-mail : cmdventure@hotmail.com

Website: www.cmdventure.com

Artist's interpretation of article headline

CMD VENTURE CO., LTD.

บริษัท ซีเอ็มดี เวนเชอร์ จำกัด จำหน่าย ตะแกรงกั้นจ๊อย ตะแกรงเหล็กฉีกเซี้ยมสังกะสี ตะข่ายฉาบปูนกันแตกร้าว

Artist's interpretation of article headline

HIGH FORMWORK (HW 100)

image hereimage here

 

 

 

 

 

 

 

 

 

 

ตะแกรงกั้นจ๊อย 

ขนาด : 450mm x 2500mm

 

Conventional construction joints are created by casting Concrete against timber formwork.   After pour, the Timber formwork is then stripped and removed; the concrete surface cast requires roughening before available for subsequent casting. Formation of joints by this method results in cracks in concrete due to hacking or chiselling, lack of uniformity in surface preparation and time-consuming.  Worse still, th bonding strength formed may be inherently weak and insufficient to resist the load designed for. HIGH FORMWORK is designed to replace the tedious conventional construction joints and used as permanent formwork for construction joints or concrete stop ends.  Utilisation of High formwork mesh by building contractors   can save contractors time and money.  Made from galvanised sheet, its unique desing incorporates mesh with roll-formed  V-ribbed helps to retain concrete grout.  Other product benefits include:

  • eliminates carpentry work, mesh is easily cut and bend.
  • no stripping / hacking or surface preparation for next pour.
  • open mesh design helps to reduce water / pour pressure.
  • flexibility in forming shapes,ideal for toggle joints or  special joints application.
  • light as compared to timber formwork,ease fortransportation and site installation.
  • mesh design provides easy piercing of      reinforcement  rods and eliminates drilling operation required for plywood.

 

HIGH  FORMWORK has found wide commercial applications for many building foundations, floor construction joints,columns, retaining walls and any stop ends. It can be used for any concrete grade complying with BS8110grade 30 - 40and slump 80to 150mm